The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop Used Spares T5 SP II Spada 3 Mille GT Strada 100 Fuel and Carburettors

Sort by Title

Sort by Price

Page 7 of 11

1 2 3 4 5 6 7 8 9 10 11

Dellorto Needle Jet 264T

FUA31588 Fits Nevada 750 (1998-2003), Cali 3 (PHF 30), Mille GT (PHF 30)

Dellorto 264T needle jet or atomiser

part in stock 1 in stock

31935588 GU31935588 31 93 55 88
3193 5588 3193.5588 31.93.55.88

£6.20

INC VAT

£5.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Inlet Manifold Kit Plastic

FUA30611 Fits G5, Convert, T3, T4, T5 1000 SP, SP II, 750S, S3, V7 Sport

Dimensions:
44mm ID at carb, 30mm ID at engine inlet

Plastic inlet manifold, replaces unavailable aluminium manifold. Suitable for PHF 30 carb conversions on models previously fitted with VHB30 carbs. Contains inlet manifold, gasket, O rings, clip and M6 bolts to secure to head. Carb mounts direct to this manifold (no inlet manifold rubber required)

Note that on models with M8 inlet manifold bolts and standard heads (T3, 1000 SP) it will be necessary to drill out the manifold bolt holes from 6mm to 8mm to reuse your existing bolts. Can be used to replace PHF30 inlet manifolds 17116265 and 17116365 which are no longer available. These manifolds exit the heads at a different angle to VHB manifolds and in some cases you may need to modify side panels to allow clearance for air filters

part in stock 1 in stock

£30.90

INC VAT

£25.75 EX VAT this is the price you will pay if you are ordering from outside the UK

Carb Top Elbow Kit

FUA53036 Fits Cali 3, Cali 1100 (1994-1997), Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, Spada 3, Mille GT, T5, V35 ALL, V50 ALL, V65 ALL, Lario, Imola, Nevada ALL, T3, T4, 1000 SP, V7 Sport, 750S, S3, Convert, G5

Ninety degree Dellorto M6 cable elbow for carb top with rubber and adjuster

part in stock 1 in stock

14937950 GU14937950 14 93 79 50
1493 7950 1493.7950 14.93.79.50

£8.50

INC VAT

£7.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Idle Screw Kit

FUA93600 Fits 1100 Sport Carb, Cali 1100 (carb), 850/1000 ALL Models, V35 ALL, V50 ALL, V65 ALL, V75, Nevada 350, Nevada 750 (1991-2003)

Dellorto kit containing idle adjust screw, o ring, spring and washer

Fits all VHB, PHF, PHBH and PHM carbs

part in stock 1 in stock

13936600 GU13936600 13 93 66 00
1393 6600 1393.6600 13.93.66.00

£8.00

INC VAT

£6.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Fuel Tap LH

TAA17105A Fits G5, Cali 2, Le Mans 2, Le Mans 3, Le Mans 1000, 1000S, 1000 SP, SP II, T3, T4, T5, Mille GT, 1100 Sport Carb, Nevada 750 (1998-2001), 250 TS

Dimensions:
16mm threaded section, 8mm fuel pipe spigot

Manual left hand petrol tap with nut and filter. On, Off and Reserve settings.

Point on lever faces back in off position. Can be used to replace electronic fuel solenoid valve 37105305

part in stock 1 in stock

17105461-z 17105461 GU17105461 17 10 54 61
1710 5461 1710.5461 17.10.54.61

£12.50

INC VAT

£10.42 EX VAT this is the price you will pay if you are ordering from outside the UK

Fuel Tap LH With Level Sender

TAA23370 Fits 750 SP, Strada 750, T5 Polizia, Spada 3, Strada 1000, Mille GT, V35 3, V50 PA, V65 Florida, V65 GT, V75 PA

Dimensions:
M16 x 1 threaded section, 140mm sender

Manual left hand petrol tap with nut and fuel level sender. On and off settings.

Will also fit most other Moto Guzzi tanks from 1976 to 1991, these can be used to replace discontinued electric taps but please measure first and check you have space for outlet pipe

part in stock 1 in stock

23105370-z 23105370 GU23105370 23 10 53 70
2310 5370 2310.5370 23.10.53.70

£29.00

INC VAT

£24.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Fuel Tap

TAA23470 Fits Mille GT, Cali 1100 (1994-1997), 750 SP, Strada 750, Strada 1000, T5 Polizia, Spada 3, V35 Florida, V65 Florida, V65 GT, V75 PA

Dimensions:
16mm threaded section, 8mm fuel pipe spigot

Manual petrol tap with nut and filter. On and off settings.

Point on lever faces back in off position. Used for RH applications on some models. TAA65401A or TAA65401B can be substituted for this part. Used for LH and RH fuel tap on Cali 1100

part in stock 1 in stock

23105470-z 23105470 GU23105470 23 10 54 70
2310 5470 2310.5470 23.10.54.70

£16.00

INC VAT

£13.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Breather Pipe 50cm

ENA27982 Universal Part

Dimensions:
6mm ID x 9mm OD x 50cm length

50cm Ariete fuel or breather pipe suitable as fuel pipe on gravity fed non injection models

Certified ethanol proof and safe for modern E10 fuel. Hose clips also available, see FUA00004

part in stock 1 in stock

£3.00

INC VAT

£2.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Polished Short Alloy Bellmouth Intake PHF

ACA12001 Fits Le Mans 1, Le Mans 2, Le Mans 3, Cali 1100 (carb), Cali 3 (PHF model), Spada 3, Strada 1000

Dimensions:
46mm ID, 45mm long

Short alloy bellmouth / trumpet intake with domed mesh for Dellorto PHF 30 and 36 carbs, screws to rear of carb replacing air filter

This part is available by special order, request a quote

£46.00

INC VAT

£38.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Choke Cable Upper

CAA00833 Fits Mille GT

Dimensions:
780mm outer length, 85mm free length, 4.5mm barrel nipple, 2.7mm barrel nipple

Upper choke cable for series 1 models with Magura switchgear

Only suitable for pre 1989 models. We advise you to measure your existing cable before ordering in case you have a non standard set up.

This part is available by special order, request a quote

28132833-z 28132833 GU28132833 28 13 28 33
2813 2833 2813.2833 28.13.28.33

£6.80

INC VAT

£5.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 7 of 11

1 2 3 4 5 6 7 8 9 10 11